Intrinsically Safe Gas Detectors FGD3 Series
Nitric Oxide Gas Detector
- Range 0-100ppm Nitric Oxide, NO.
- Suitable for use in Zones 0, 1 and 2 hazardous areas.
- Two wire connection.
- 8 to 24 volt dc operation.
- Industry standard 4 to 20mA output.
- Digital display.
- Single operator calibration.
The FGD 3 Nitric Oxide Gas Detector uses electrochemical sensor technology to detect the level of Nitric Oxide in the atmosphere over the range 0 - 100ppm. The detectors use the industry standard 4-20mA current loop both to power the detector and to convey the gas levels detected to a control unit. This means that under zero gas conditions 4mA is drawn from the supply, and under full scale gas conditions 20mA is drawn from the supply. The current varies linearly for gas levels between zero and full scale. The detector head uses a two-wire connection.
Hazardous Area Certification Data
Certificate Number - BAS 01ATEX2300
II 2 G Ex ia IIC T4 Gb (-20 deg. C <Ta< +60 deg. C)
FGD3 Nitric Oxide Detectors - Order Codes
|SS410||FGD3 Nitric Oxide Gas Detector - (4-20mA Output) - Range 0-100ppm NO|