FGD14 Series Safe Area Gas Detectors
Hydrogen Chloride - Mains or DC Powered
With Control Relays
- Standard range 0-30ppm HCl.
- Two stage alarm relays.
- Inbuilt test button.
- External pushbutton calibration.
- Inbuilt sensor diagnostics.
- Red 'alarm' LED.
- Green 'power on' LED.
- Internal audible sounder.
- Plug-in sensor.
- Remote audible/visual indicator unit.
- Protection to IP54.
- Optional PC interface module.
- Fault indication.
- Mains and dc powered versions available.
The FGD14 Hydrogen Chloride gas detector is a stand-alone detector using electrochemical gas sensor technology. It has a front panel display of the gas level and an internal visual and audible alarm. The detector contains 2 control relays that can be activated via user definable alarm set points; the relay contacts can then be used to control external equipment.
Communication with other equipment such as a PC may be acheived by using the inbuilt RS232 communications port. An audible/visual remote unit is also provided with the detector
Models are available for powering from either:-
- A mains supply of between 85 and 265 volts ac.
- A DC power supply from 9 to 30 volts.
Warning - These gas detectors must only be used in applications where there is no risk of potentially explosive gases being present or of them being created through industrial processes or other activities within the area concerned.
An optional weather guard is available for installations exposed to the atmosphere or contaminants and is also suitable for use in other areas where hosing down takes place. The weather guard reduces the possibility of water or other contaminants entering into the gas sensor thereby improving the overall reliability of the gas detector in harsh environments.The weather guard is attached with tamperproof screws to ensure that it is not inadvertently removed.
|SS819||FGD14 Hydrogen Chloride Gas Detector - 0-30ppm HCl - Mains Powered|
|SS819-DC||FGD14 Hydrogen Chloride Gas Detector - 0-30ppm HCl - DC Powered|
|SS475||Protective Weather Guard|