
Intrinsically Safe Hydrogen Sulphide Fixed Gas Detector FGD3 Series Using Electrochemical Gas Sensor Technology

Features
Standard range 0-50ppm, other ranges available up to 0-200ppm Hydrogen Sulphide, H2S.
Suitable for use in Zones 1 and 2 hazardous areas.
Two wire connection.
8 to 24 volt dc operation.
Industry standard 4 to 20mA output.
Digital display.
Single operator calibration.
Other FGD3 Gas Types Available - Ammonia | Carbon Dioxide | Carbon Monoxide | Chlorine | Flammable (Catalytic) | Flammable (Infrared) | Hydrogen | Hydrogen Chloride | Hydrogen Cyanide | Methane | Nitric Oxide | Nitrogen Dioxide | Oxygen | Sulphur Dioxide |
Hazardous Area Certificate No.
BAS 01ATEX2300
II 2 G Ex ia IIC T4 Gb (-20 deg. C ≤Ta< +60 deg. C)
Description
The FGD 3 Hydrogen Sulphide Gas Detector uses electrochemical sensor technology to detect the level of Hydrogen Sulphide in the atmosphere in various ranges up to 200ppm. The detectors use the industry standard 4-20mA current loop both to power the detector and to convey the gas levels detected to a control unit such as the Status Scientific Controls MCU Series. This means that under zero gas conditions 4mA is drawn from the supply, and under full scale gas conditions 20mA is drawn from the supply. The current varies linearly for gas levels between zero and full scale. The detector head uses a two-wire connection.
Stock No. |
Description |
SS402 |
FGD3 Hydrogen Sulphide Gas Detector - (4-20mA Output) - Range 0-50ppm H2S |